You are here:

## Blog

08Apr

### Introduction to Torque Part 2

Friction in the Bolted JointWhen a threaded fastener is tightened, the induced tension results in friction under the head of the bolt and in the threads. It is generally accepted that as much as 50% of the applied torque is expended in overcoming friction between the bolt head and the abutting surface and another 30% to 40% is lost to friction in the threads. As little as 10% of the applied torque results in useful work to tension the bolt.  Given that up to 90% of the applied torque w...
19Mar

### Introduction to Torque Part 1

What is Torque?Torque is any force or system of forces that tends to cause rotation about an axis. Measurement of TorqueImagine someone tightening a bolt using a socket attached to a meter (m) long bar. If they apply 10 kg of force (kgf) perpendicular to the bar they will produce a torque of 10 kgf·m at the axis (the centre of the bolt).However, under the S.I. system of measurement, force is expressed in Newtons (N) rather than kgf. The conversion between kgf and N is x 9.807 so the ...
12Feb

### Careers Open Evening 2019

Our annual 2019 careers open evening was last Thursday. Despite the slightly lower numbers than usual, it was a highly successful evening. Over 50 guests came to see us which allowed Norbar staff to spend more quality time talking to parents, potential apprentices and employees about careers in engineering.More excitingly this year we had more females visit to talk to us; maybe there has been a turning point at last. Thank you to Chris and Rob of the Engineering Trust, our training provider who ...
18Jan

### Review of 2018

Reflecting on 2018 my first thought was “hard work, a year best left behind”.  However, as I looked back through my notes I realised how wrong my first reflection was.  True, we did have to work hard and there were some setbacks but actually there were some spectacular successes as well.  This is how the year went. JanuaryWe hit the ground running with people travelling all over the world.  Neill was in India for the official opening of the “Ian Brodey ...
10Dec

### RCI Wrap up

During October, Norbar held its 4th Rapid Continuous Improvement (RCI) workshop and the 3rd this year.5 new teams looking to improve 5 key processes: -  Small Torque Wrench Assembly & Calibration Secondary Motion Assembly Speed Design Review Machine Shop Reorganisation Multiplier Surface finishing Each team of between 6-8 members included process operators (the experts), Engineers, guests from other processes and guests from Norbar and other Snap-on companies. We welcomed back...
16Nov

### Revisiting the BS EN ISO 6789:2017 standard

It’s been nearly a year since the revised BS EN ISO 6789:2017 standard was released. With this in mind, Philip Brodey, Sales Director at Norbar Torque Tools, the first laboratory in the world to be accredited to perform hand torque calibrations to the standard, explores the key changes, and also some of the challenges these have brought.What does the revised standard involve?Previously, the BS EN ISO 6789:2003 divided the requirements into three sections: design conformance testing, qualit...
10Sep

### RCI - Machine Shop Organisation

The second week in July 2018 marked Norbar’s third, full scale Rapid Continuous Improvement (RCI) event, consisting of four teams, each tasked on a different, week long, intensive project. Each team had differing objectives but all had common goals: to help make the factory more productive, easier to work in, and safer.Each team consisted of 9 members, all of differing standings within the business, shop floor to directors, with one team member being a representative from another part of t...
24Jul

### BS7882:2017 Method for calibration and classification of torque measuring devices

The latest edition of BS7882 was published on the 31st August 2017. Current best practice has been incorporated into this revision which provides a practical solution for the calibration of torque measuring devices including the technical requirements needed for high accuracy classes without making the calibration too time consuming to perform and hence commercially unacceptable. There are minor changes to the calibration procedure compared to the 2008 edition. The minimum certificate content ha...
26Jun

### In my professional capacity

After completing my degree, I joined the graduate program of Ford of Europe working in the Finance function, however I was fortunate that just about all of my roles there involved working with the product (Cars at that time) and to this day I remain passionate about our products as it is at the very core of what we do. William Brodey our Grandfather, the founder of the business had a philosophy of ‘Doing the right things right’. I am very proud that this sentiment carries on today 75...
11Jun

### The Formative Years

On the eve of my retirement I reflect back on 50 years involvement in the Torque Tool industry. It was at the age of five I had my earliest memory of the North Bar Tool Company Ltd (it was to be four years later that we renamed the company Norbar Torque Tools Ltd.), I was visiting my father’s office in North Bar Place wearing my school uniform of shorts and shirt and I ended up scolding the backs of my legs on the radiator, you could say that event was burned into memory. Future visits inc...
Page 2 of 4 [2]

## FAQ

### Use Our Calculators

Norbar has devised easy-to-use online calculators that support the correct application of torque in three key areas:

1. Unit conversion to assist international measurement definitions.
2. Torque extension for setting correct values
3. Torque tension to identify precise levels of torque to be applied for individual applications.