The T-Box™ 2 utilises it's powerful processor to to provide a seamless and complete torque data collection package. This is capable of tool calibrations, data logging, simultaneous transducer connections and archiving to your PC.

Technical Data

The AnB Module unlocks the two-transducer limit on the T-Box™2, allowing more to be connected simultaneously and broadening the possible applications for the already versatile product.

TruCheck™ 2 is a cost effective torque wrench checker that has been redesigned to incorporate improved features whilst maintaining ease of use.

The TruCheck™ 2 aims to cut the cost of purchasing a torque wrench checking system and remove the reservations over the complexity of using such equipment

Technical Data

TruCheck™ 2 is a cost effective torque wrench checker that has been redesigned to incorporate improved features whilst maintaining ease of use.

The TruCheck™ 2 aims to cut the cost of purchasing a torque wrench checking system and remove the reservations over the complexity of using such equipment

Technical Data

The Professional Torque Tester - Series 2, Pro-Test, is an accurate, highly specified and easy to operate instrument for testing and calibrating all types of torque wrench.

'Pro-Test' is priced to make in-house testing a viable proposition even for the smaller industrial and automotive torque wrench user.

• Guaranteed classification to BS7882:2008 , Class 1 or better over the primary calibration range (20% to 100% of full scale), Class 2 or better over the secondary calibration range (lowest calibrated value to 20% of full scale). Class 1 equates to +/-0.5% of reading.
• Three essential operating modes allow the Pro-Test to be used with all torque wrench types 'Track' displays the live value, 'Peak Memory' records the highest value and 'First Peak Memory' records the first peak of torque (for click type torque wrenches). Both memory modes can beused with manual or automatic reset.
• Large back lit display is easily visible from a distance and in poor light.
• Display and Transducer are hard-wired together with a 600 mm cable.
• All common units of torque measurement are included.
• Pictorial mode selection incorporated for ease of use.
• User can select the language they wish to work in (most European languages are included).
• Transducer can be mounted for torque wrench operation in the horizontal or vertical plane.
• RS-232-C is included for the output of reading to a printer, PC, data capture unit, SPC software etc.
• Optional mounting plate gives greater flexibility of mounting options.
• All user settable parameters are menu selectable from the front panel.
• Supplied in a robust plastic case with a data transfer lead to connect to a PC or printer.
• As standard, all transducers are calibrated in a clockwise direction. For additional anti clockwise direction order Part No. PROTEST.CCW.
• How to use a Pro-Test

Pro-Test Technical Data

The TST combines simplicity with up to date technology to provide a high quality instrument for the testing and calibration of low capacity torque tools.

Featuring an internal transducer complete with Rundown Fixture, the TST is available in 3 torque ranges, 0.04 to 2 N·m, 0.5 N·m to 10 N·m and 1.25 to 25 N·m. Class 1 system accuracy over its Primary range (+/-0.5% of reading from 20% to 100% of full scale).

What makes the TST genuinely versatile is the interface for an external transducer. This interface, accessed by a 2 way switch in the TST, allows the connection of any transducer from Norbar's "SMART" range and most mV/V calibrated transducers from Norbar or other manufacturers.

• Pictorial display panel for easy mode selection.
• Limit detection with low, pass and fail indication. Up to 8 target values can be set.
• Digital limit state output for control of external tools.
• Operation from fast charge internal battery pack (maximum time of 3 hours 20 minutes for full charge) or a.c. supply (90 to 264 Volts).
• RS-232-C serial data interface for connection to a printer or PC. Continuous RS 232 output when used in track mode (up to 11 readings per sec).
• Pulse count feature in Impulse mode and Clutch Tool mode.
• 'SMART' intelligence for transducer recognition.
• Memory for calibration details of 20 non-'SMART' mV/V calibrated transducers.
• Analogue output allows the instrument to be used as part of a process control system for performance analysis.
• User selectable frequency response for each mode of operation.
• All user selectable features have password protection. The instrument can be issued to users with only the required modes of operation and units of measure enabled. This feature can virtually eliminate operator induced errors.

• Product Video

TST Technical Data

The TTTSeries3 instrument has all the features of the Series 2 instruments, butnow offers 3 transducer inputs, rather than 2. This will be particularly ideal for customers using the TTT with the TWL1500 loader and full compliment of three FMT Transducers.

Any transducer from Norbar's 'SMART' range and most mV/V calibrated transducers from Norbar or other manufacturers can be connected to the TTT. The 'SMART' feature means that once a transducer has been connected, the instrument will automatically recognise calibration details such as mV/V output, serial number and capacity.

• Pictorial display panel for easy mode selection.
• Limit detection with low, pass and fail indication. Up to 12 target values can be set.
• Digital limit state output for control of external tools.
• Operation from fast charge internal battery pack (maximum time of 3 hours 20 minutes for full charge) or a.c. supply (90 to 264 Volts).
• RS-232-C serial data interface for connection to a printer or PC. Continuous RS 232 output when used in track mode (up to 11 readings per sec).
• Pulse count feature in Impulse mode and Clutch Tool mode.
• 'SMART' intelligence for transducer recognition, now displays transducer capacity, units and Serial No.
• Memory for calibration details of 20 non-'SMART' mV/V calibrated transducers.
• Analogue output allows the instrument to be used as part of a process control system for performance analysis.
• User selectable frequency response for each mode of operation.
• All user selectable features have password protection. The instrument can be issued to users with only the required modes of operation and units of measure enabled. This feature can virtually eliminate operator induced errors.
• Peak memory modes can now be configured to have auto reset (previously only manual reset was possible).
• Series 3 users can set up their own measurement units, making it possible to interface with non torque transducers, for example load or pressure.
• Product Video

TTT Technical Data

Norbar T-Box XL™ and TDMS (Torque Data Management System) software together provide the complete torque audit system.

The T-Box XL™ is a hand held and bench mounted torque measuring instrument with a user friendly colour touch screen interface. Both hand and powered tools can be measured, calibrated and results viewed in graph mode. This comprehensive instrument functions in 12 languages, has all common torque units, pre-loaded tool calibration templates and a large memory for storage of results. T-Box XL™ features a USB interface to a PC where the Torque Data Management System (TDMS) software is installed for archiving of test, calibration and graphical results.

How to measure and collect torque data using the T-Box Video

T-Box XL™ Technical Data