The Voice of
Torque Control

You are here: News & Events  >  Blog

Blog

From the monthly archives: August 2015

We are pleased to present below all posts archived in 'August 2015'. If you still can't find what you are looking for, try using the search box.

The complications of ISO standards

In my last blog I explained that the working group for torque wrenches had been meeting since 2008 to revise and develop the existing standard for torque wrenches ISO 6789:2003.   The project has taken far too long and sometimes people ask me why we have not finished before. In the following paragraphs I will try to explain some of the reasons, from my perspective. My aim is to give you an insight into standards preparation.   Every ISO standard has an owner, in the form of a Technical Committee. ISO/TC 29 looks after “small tools” which includes drills, milling cutters, abrasive grinding discs as a well as hand tools. The area of spanners, screwdrivers etc are defined as “Assembly tools for screws and nuts” and these are the responsibility of a Sub-Committee called ISO/TC 29/SC 10. Sub-Committees are populated with delegates from member countries. In ISO/ TC 29/SC 10 we have 10 countries who are registered as participating and 16 countries who are observing. More informa ...

Read the rest of entry »

One Man and His Dog

As a lad I was always fascinated by the TV show ‘One man and his dog’ as a farmer, usually from Wales or the ‘bleak North’ would gather sheep of various levels of intelligence and commitment to the cause into a pen, against the clock but with other criteria such as style (or some other qualitative factor) being important to the outcome. This was prime time telly and strangely absorbing.   And so it is with being a Process Stream Manager as you stand there with your metaphorical crook and pipe (to make you look unflappable) gazing out over your flock as they all walk in the right direction in a timely manner taking care of all qualitative matters. Then one day the company asked if my Process Stream could take cost out of the Torque Wrench Body Tubes by moving some of the sub contracted operation in house. We were to start with surface preparation and investigations were undertaken with suppliers of the equipment who were more than happy to sell us kit confidently exclaiming wit ...

Read the rest of entry »

Let’s talk cycle torque!

Cycling is a growth sector in the UK. Whether it’s because of Bradley Wiggins, Chris Froome, Chris Hoy or Team Sky at the Tour de France, cycling traffic has increased every year since 2008 – roughly about the time that the British first realised we were getting quite good at it.


Read the rest of entry »

Product Selector

Find a Distributor

Norbar Videos

What Our Customers Say

Download Our Apps

FAQ

Use Our Calculators

Norbar has devised easy-to-use online calculators that support the correct application of torque in three key areas:

  1. Unit conversion to assist international measurement definitions.
  2. Torque extension for setting correct values
  3. Torque tension to identify precise levels of torque to be applied for individual applications.

NORBAR TORQUE TOOLS LTD. Wildmere Road, Banbury, Oxfordshire, OX16 3JU, United Kingdom
Registered Office as above - Registered in England No. 380480 - VAT No. GB 119 1060 05