Posted on 11/03/2016 By Norbar Admin
Norbar has been going independently to the ‘Cologne Fair’ for about 27 years now and probably for 20 years before that sharing a stand with our distributor so we have seen a lot of changes. The significant change this year was the drop from four days to three for the event. Strangely, we still started on Sunday; it was the Wednesday that was dropped! Whether the three day show was a good decision was certainly something that exhibitors and visitors were talking about. From a visitor’s point of view the show is significantly smaller than it was 20 years ago and it no longer takes four days to do it justice. On the other hand, they would have found stands busier and may have had to wait longer to speak to the people they needed to. There was talk amongst exhibitors of possibly having to take more staff and having more stand space in order to cope with the concentration of visitors down to three days and this would largely offset the cost benefit of exhibitin ...
Posted on 10/03/2016 By Norbar Admin
The Ferrari Testarossa has been a bit of a dream since I was a kid. I was born in 1977, and it was probably one of the largest car icons during the 80s and beginning of the 90s... maybe one of the greatest ever?
When I thought I had the opportunity to get my hands on one, I really wanted to look at the very first series for one reason only; they have a unique large centre nut that gives them a very classic look, instead of five wheel bolts.
First series car (note large nut on the wheels)... http://www.ultimatecarpage.com/images/car/1889/13782/Ferrari-Testarossa.jpg
Later model (note five bolts on the wheels)... http://cdn.silodrome.com/wp-content/uploads/2013/11/Ferrari-Testarossa-Berlinetta-1.jpg
My decision to purchase one seemed fairly clear-cut, but the internet and classic car owner meetings were full of stories of Testarossa’s having lost one wheel causing enormous damage, and I suspect large bills too. Here I have an advantage – working for torque tool c ...
Posted on 17/02/2016 By Norbar Admin
In January we hosted a Careers Evening aimed at 14-19 year olds looking to understand a little more about Engineering, and other potential career paths once they leave school.
The aim of the evening was to show young people that we are an Employer of Choice within Banbury and that we are looking for technically minded electromechanical/software people to join us.
Our fantastic team made up of Engineers, both electronic and mechanical, supported by our Quality, Marketing and Procurement teams enthusiastically demonstrated product, and discussed potential career paths with students, potential apprentices and parents. Our training provider - the Engineering Trust and the HR team were also on hand to guide prospective apprentices through the programme, its structure and benefits.
Our talented current apprentices, years 1 – 4 were also available throughout the evening to talk to parents and students, on what it’s really like being an apprentice and why they enjoy working for Norbar. And they d ...
Posted on 26/01/2016 By Norbar Admin
Norbar’s new ClickTronic torque wrench is a mechanical “clicker” torque wrench with an electronic scale. This may lead some to wonder where this fits into a torque wrench market that already contains fully electronic wrenches and fully mechanical wrenches.
Our answer is that, for many, we believe that the ClickTronic will give the best of both worlds and to explore this statement we need to look at mechanical “clicker” wrenches and fully electronic wrenches and consider what they are best for.
Electronic wrenches are invaluable in the quality control environment or for highly safety critical application where you need greater accuracy than mechanical torque wrenches provide and/or you want to record torque tightening data. However, they need to be used very slowly and steadily to achieve high accuracy. When you are using an electronic wrench for tightening, it is normal for the target to be set and the wrench will indicate that you are approaching the target ...
Posted on 01/09/2015 By Norbar
Torque wrenches are common place across a variety of industrial processes, commercial garages and even homes wherever there is a precision assembly process utilising threaded fasteners. Considering their widespread use however, there remains a number of things that people get wrong or simply don’t know. Here Philip Brodey at Norbar Torque Tools highlights the top ten things to consider.
1. Storing your torque wrench
When a torque wrench is in regular use it does not need to be wound back. However, when storing a torque wrench for an extended period of time, users should always wind it down to the minimum scale setting and never to zero.
A fully loaded torque wrench, left in storage for a long period, can cause a ‘set’ in the spring, causing it to weaken over time. On the other end of the scale, by completely off-loading the spring, other components within the wrench may move fractionally relative to each other. When you re ...
Posted on 21/08/2015 By Norbar
In my last blog I explained that the working group for torque wrenches had been meeting since 2008 to revise and develop the existing standard for torque wrenches ISO 6789:2003.
The project has taken far too long and sometimes people ask me why we have not finished before. In the following paragraphs I will try to explain some of the reasons, from my perspective. My aim is to give you an insight into standards preparation.
Every ISO standard has an owner, in the form of a Technical Committee. ISO/TC 29 looks after “small tools” which includes drills, milling cutters, abrasive grinding discs as a well as hand tools. The area of spanners, screwdrivers etc are defined as “Assembly tools for screws and nuts” and these are the responsibility of a Sub-Committee called ISO/TC 29/SC 10. Sub-Committees are populated with delegates from member countries. In ISO/ TC 29/SC 10 we have 10 countries who are registered as participating and 16 countries who are observing. More informa ...
Posted on 13/08/2015 By Norbar
Cycling is a growth sector in the UK. Whether it’s because of Bradley Wiggins, Chris Froome, Chris Hoy or Team Sky at the Tour de France, cycling traffic has increased every year since 2008 – roughly about the time that the British first realised we were getting quite good at it.
Posted on 16/10/2014 By Norbar
It goes without saying that excellent customer service is a vital part of a successful business and at Norbar this is no different. In fact, we pride ourselves on delivering the very best service to our customers at every stage. We don’t just see the customer service team as a group of people who deal with complaints or who are called upon when people have an issue that needs resolving. Exceptional customer service starts from the first contact that is made with the customer to the last, and our staff are trained to always ensure that each and every one of our customers receive the very best service from any member of the Norbar team they encounter.
This customer focused ethos is part of Norbar’s philosophy, something that we instil in all of our staff from the moment they join us, and something that we continually strive to uphold. Our Customer Relations Manager, Stephen Maxfield, has blogged about the mantra that his team upholds:
Good customer service is about giving the customer an e ...
Posted on 02/10/2014 By Norbar
I have been with Norbar Torque Tools for nearly seven years, with my first role being a Trainee Sales Engineer. I have worked my way up through the company to my current role of Technical Sales Engineer.
The primary objective of my role is to support the internal Customer Relations team, who deal with the day-to-day order entering process and are the first point of contact for customers. I also support the network of distributors that we have, and the end users that contact us on a daily basis. The Technical Sales Engineers are essentially the ‘safety net’ for when something goes wrong or when a customer has a technical enquiry.
The role involves a lot of interaction with the distribution network that has been set up to enhance maximum productivity for customers. It involves daily support via email and telephone about potential applications for Norbar products. However, our support offering for customers doesn’t end there. We regularly visit end users to evaluate applications and sol ...
Posted on 27/03/2014 By Norbar
Recently I was fortunate enough to embark upon a visit to the ship building region of South Korea. The south east region of South Korea, around the cities of Ulsan, Busan and Geoje Island, is home to three of the largest shipyards in the world – Hyundai Heavy Industries (HHI), Samsung Heavy Industries (SHI) and Daewoo Ship and Marine Engineering (DSME). These yards dominate the towns and landscapes that they occupy, the HHI yard for example covering an area of 1,780 acres. Amazingly, this dominant position in world shipbuilding has been reached in just 40 years, HHI’s yard having been commissioned in 1974.
The visit provided us with an invaluable insight into what our customers are experiencing in this market, their needs and how important a role torque tools and solutions play in modern marine engineering.
What became clear is that a shift has taken place in South Korean shipbuilding towards high value, high sophistication vessels. While they may still be building contai ...
Pages: Previous12NextReturn Top