The Voice of
Torque Control

You are here: News & Events  >  Blog

Blog

From the category archives: Uncategorized

Uncategorized posts

Introduction to Torque Part 3

Why should bolts be tightened to yield?

Read the rest of entry »

Annual Apprentice Awards Evening 2019

Well done Arron & Joe!

Read the rest of entry »

Introduction to Torque Part 2

Introduction to Torque part 2 -  learn more about Friction in a Bolted Joint

Read the rest of entry »

Introduction to Torque Part 1

What is Torque?

Read the rest of entry »

Careers Open Evening 2019

Over 50 guests came to see us which allowed Norbar staff to spend more quality time talking to parents, potential apprentices and employees about careers in engineering.

Read the rest of entry »

Review of 2018

Reflecting on 2018 my first thought was “hard work, a year best left behind”. However, as I looked back through my notes I realised how wrong my first reflection was. True, we did have to work hard and there were some setbacks but actually there were some spectacular successes as well. This is how the year went.

Read the rest of entry »

RCI Wrap up

During October, Norbar held its 4th Rapid Continuous Improvement (RCI) workshop and the 3rd this year.

5 new teams looking to improve 5 key processes

Read the rest of entry »

Revisiting the BS EN ISO 6789:2017 standard

It’s been nearly a year since the revised BS EN ISO 6789:2017 standard was released. With this in mind, Philip Brodey, Sales Director at Norbar Torque Tools, the first laboratory in the world to be accredited to perform hand torque calibrations to the standard, explores the key changes, and also some of the challenges these have brought.

Read the rest of entry »

RCI - Machine Shop Organisation

The second week in July 2018 marked Norbar’s third, full scale Rapid Continuous Improvement (RCI) event, consisting of four teams, each tasked on a different, week long, intensive project. Each team had differing objectives but all had common goals: to help make the factory more productive, easier to work in, and safer.

Read the rest of entry »

BS7882:2017 Method for calibration and classification of torque measuring devices

The latest edition of BS7882 was published on the 31st August 2017. Current best practice has been incorporated into this revision which provides a practical solution for the calibration of torque measuring devices including the technical requirements needed for high accuracy classes without making the calibration too time consuming to perform and hence commercially unacceptable. There are minor changes to the calibration procedure compared to the 2008 edition. The minimum certificate content has also been increased to reflect the enhanced technical requirements of the standard.

Read the rest of entry »

Pages: Previous1234567...10NextReturn Top

Product Selector

Find a Distributor

Norbar Videos

What Our Customers Say

Download Our Apps

FAQ

Use Our Calculators

Norbar has devised easy-to-use online calculators that support the correct application of torque in three key areas:

  1. Unit conversion to assist international measurement definitions.
  2. Torque extension for setting correct values
  3. Torque tension to identify precise levels of torque to be applied for individual applications.

NORBAR TORQUE TOOLS LTD. Wildmere Road, Banbury, Oxfordshire, OX16 3JU, United Kingdom
Registered Office as above - Registered in England No. 380480 - VAT No. GB 119 1060 05