The Voice of
Torque Control

You are here: Products  >  Torque Measurement  >  Torque Transducers  >  Annular Transducers for HT/ET/PTM-92 & 119  >  'SMART' Annular TD, 6000 N·m, for HT/ET/PTM-119, 1 1/2" sq. dr.; mV/V

'SMART' Annular TD, 6000 N·m, for HT/ET/PTM-119, 1 1/2" sq. dr.; mV/V

This Annular transducer has been designed to fit directly to the HandTorque, EvoTorque and PneuTorque 119 diameter tools and will accurately measure the torque output via a display instrument.

Standard calibration is performed loading counter clockwise only.

Part number: 50756.IND
EAN Bar Code: -
NATO number: -
Accuracy: ±0.5%
Operates between:
600.0 - 6000.0 N·m


  • Temp Range Operating: -10°C to +50°C
  • Temp Range Storage: -20°C to +70°C
  • Thermal Effect On Span: < +/- 0.03%/°C
  • Thermal Effect On Zero: < +/- 0.01%/°C
  • Max Torsion Of Capacity: 150% of rated torque
  • Torsional Deflection: < 1°
  • Fatigue: > 10 exp 7 cycles
  • Square Drive: 1 1/2"


  • Robust, heat treated, alloy steel torsion shaft design.
  • Designed to ignore non torsional forces.
  • 'SMART' transducers have a built in memory circuit which contains essential information about the transducer. This information can be read by Norbar's 'Pro-Log' instrument meaning that when the transducer is connected, it is immediately recognised and ready for use. When ordering for a Pro-Log, use part code suffix '.LOG' (eg. 50659.LOG) if you require a torque units calibration certificate.
  • 'SMART' transducers can also be used with many instruments not of Norbar manufacture. However, these will operate as normal ratio calibrated (mV/V) transducers - the 'SMART' data will not be read. For non Norbar instruments or for when a mV/V certificate is required, use part code suffix '.IND'.

Operators Handbook


Associated Ranges

Product Selector

Find a Distributor

Norbar Videos

Norbar News & Updates

Download Our Apps


Use Our Calculators

Norbar has devised easy-to-use online calculators that support the correct application of torque in three key areas:

  1. Unit conversion to assist international measurement definitions.
  2. Torque extension for setting correct values
  3. Torque tension to identify precise levels of torque to be applied for individual applications.
Copyright 2017 Norbar

Norbar Torque Tools. 45-47 Raglan Avenue, Edwardstown, SA 5039, Australia