The Voice of
Torque Control

You are here: Products  >  Torque Measurement  >  Torque Measurement Instruments

Torque Measurement Instruments

Norbar has a range of torque measurement instruments, from the easy to use, cost effective TruCheck through to the sophisticated T-Box XL and TDMS software, which provides the complete solution for torque tool calibration, data logging and data management.

TruCheck 0.1 N·m - 25 N·m

TruCheck 0.1 N·m - 25 N·m

When putting a torque tester into an environment where people are not calibration specialists, concerns can arise with regards to incorrect selections being made and therefore the potential of incorrect tool setting and consequently joint failure.

These new TruCheck Models have been designed to calibrate Torque Screwdrivers and small Torque Wrenches up to 25 N·m.

Available in two versons, the basic  version is the 'TruCheck',  and the more complex, with greater functionality, is the 'TruCheck Plus'.

Read more

TruCheck 10 N·m - 2000 N·m

TruCheck 10 N·m - 2000 N·m

One of the concerns in putting a torque tester into an environment where people are not calibration specialists is that incorrect selections will be made with the potential of incorrect tool setting and consequently joint failure.

The 'TruCheck' torque wrench testers aim to cut the cost of purchasing a torque wrench calibration system, and remove the fears over the complexity of using such equipment.

There are two versions available, the 'TruCheck' being the most basic version, and the 'TruCheck Plus' having greater functionality, to offer more flexibility.

Read more

Pro-Test Series 2

Pro-Test Series 2

The Professional Torque Tester - Series 2, Pro-Test, is an accurate, highly specified and easy to operate instrument for testing and calibrating all types of torque wrench.

'Pro-Test' is priced to make in-house testing a viable proposition even for the smaller industrial and automotive torque wrench user.

  • Guaranteed classification to BS7882:2008 , Class 1 or better over the primary calibration range (20% to 100% of full scale), Class 2 or better over the secondary calibration range (lowest calibrated value to 20% of full scale). Class 1 equates to +/-0.5% of reading.
  • Three essential operating modes allow the Pro-Test to be used with all torque wrench types 'Track' displays the live value, 'Peak Memory' records the highest value and 'First Peak Memory' records the first peak of torque (for click type torque wrenches). Both memory modes can be used with manual or automatic reset.
  • Large back lit display is easily visible from a distance and in poor light.
  • Display and Transducer are hard-wired together with a 600 mm cable.
  • All common units of torque measurement are included.
  • Pictorial mode selection incorporated for ease of use.
  • User can select the language they wish to work in (most European languages are included).
  • Transducer can be mounted for torque wrench operation in the horizontal or vertical plane.
  • RS-232-C is included for the output of reading to a printer, PC, data capture unit, SPC software etc.
  • Optional mounting plate gives greater flexibility of mounting options.
  • All user settable parameters are menu selectable from the front panel.
  • Supplied in a robust plastic case with a data transfer lead to connect to a PC or printer.
  • As standard, all transducers are calibrated in a clockwise direction. For additional anti clockwise direction order Part No. PROTEST.CCW.
  • Product Video
Read more

TST - Series 2

TST - Series 2

The TST combines simplicity with up to date technology to provide a high quality instrument for the testing and calibration of low capacity torque tools.

Featuring an internal transducer complete with Rundown Fixture, the TST is available in 3 torque ranges, 0.04 to 2 N·m, 0.5 N·m to 10 N·m and 1.25 to 25 N·m. Class 1 system accuracy over its Primary range (+/-0.5% of reading from 20% to 100% of full scale).

What makes the TST genuinely versatile is the interface for an external transducer. This interface, accessed by a 2 way switch in the TST, allows the connection of any transducer from Norbar's "SMART" range and most mV/V calibrated transducers from Norbar or other manufacturers.

  • Pictorial display panel for easy mode selection.
  • Limit detection with low, pass and fail indication. Up to 8 target values can be set.
  • Digital limit state output for control of external tools.
  • Operation from fast charge internal battery pack (maximum time of 3 hours 20 minutes for full charge) or a.c. supply (90 to 264 Volts).
  • RS-232-C serial data interface for connection to a printer or PC. Continuous RS 232 output when used in track mode (up to 11 readings per sec).
  • Pulse count feature in Impulse mode and Clutch Tool mode.
  • 'SMART' intelligence for transducer recognition.
  • Memory for calibration details of 20 non-'SMART' mV/V calibrated transducers.
  • Analogue output allows the instrument to be used as part of a process control system for performance analysis.
  • User selectable frequency response for each mode of operation.
  • All user selectable features have password protection. The instrument can be issued to users with only the required modes of operation and units of measure enabled. This feature can virtually eliminate operator induced errors.
  • Product Video

Read more

TTT - Series 3

TTT - Series 3

The TTT Series 3 instrument has all the features of the Series 2 instruments, but now offers 3 transducer inputs, rather than 2.  This will be particularly ideal for customers using the TTT with the TWL1500 loader and full compliment of three FMT Transducers.

Any transducer from Norbar's 'SMART' range and most mV/V calibrated transducers from Norbar or other manufacturers can be connected to the TTT. The 'SMART' feature means that once a transducer has been connected, the instrument will automatically recognise calibration details such as mV/V output, serial number and capacity.

  • Pictorial display panel for easy mode selection.
  • Limit detection with low, pass and fail indication. Up to 12 target values can be set.
  • Digital limit state output for control of external tools.
  • Operation from fast charge internal battery pack (maximum time of 3 hours 20 minutes for full charge) or a.c. supply (90 to 264 Volts).
  • RS-232-C serial data interface for connection to a printer or PC. Continuous RS 232 output when used in track mode (up to 11 readings per sec).
  • Pulse count feature in Impulse mode and Clutch Tool mode.
  • 'SMART' intelligence for transducer recognition, now displays transducer capacity, units and Serial No.
  • Memory for calibration details of 20  non-'SMART' mV/V calibrated transducers.
  • Analogue output allows the instrument to be used as part of a process control system for performance analysis.
  • User selectable frequency response for each mode of operation.
  • All user selectable features have password protection. The instrument can be issued to users with only the required modes of operation and units of measure enabled. This feature can virtually eliminate operator induced errors.
  • Peak memory modes can now be configured to have auto reset (previously only manual reset was possible).
  • Series 3 users can set up their own measurement units, making it possible to interface with non torque transducers, for example load or pressure.
  • Product Video
Read more

T-Box XL & TDMS

T-Box XL & TDMS

Norbar T-Box XL™ and TDMS (Torque Data Management System) software together provide the complete torque audit system.

The T-Box XL™ is a hand held and bench mounted torque measuring instrument with a user friendly colour touch screen interface. Both hand and powered tools can be measured, calibrated and results viewed in graph mode. This comprehensive instrument functions in 12 languages, has all common torque units, pre-loaded tool calibration templates and a large memory for storage of results. T-Box XL™ features a USB interface to a PC where the Torque Data Management System (TDMS) software is installed for archiving of test, calibration and graphical results.

View T-Box XL™ Video.
 

Read more

Product Selector

Finding the correct torque tool for your specific application is essential to ensure torque is applied accurately and with maximum ease.

Use our Product Selector to find exactly the right Norbar tool for the job.

Click here >>

Find a Distributor

There are Norbar companies in the UK, North America, Australia, New Zealand, Singapore, China and India, together with a network of specialist distributors in most countries.

Select any region on our world map for contact details.

Click here >>

Download Catalogue

Details of Norbar’s extensive range of torque wrenches, multipliers and equipment for measurement and calibration can be downloaded in our comprehensive online product catalogue.

Click here >>

Norbar Videos

Norbar’s collection of training videos.

Click here >>

Norbar News & Updates

Read about Norbar’s news and developments in the UK and across our international network for the latest updates on the fascinating and fast-moving world of precision torque engineering.

Click here >>

Download Our Apps

Norbar apps are available free for download on Android and iPhone and are invaluable tools for engineers.

Our Torque Unit Converter provides instant conversion across Metric, SI and Imperial units.

The Torque Extension app calculates the exact torque wrench setting value for required level of torque to be applied.

Click here >>

FAQ

Precision torque engineering is a wide and complex field which is critical to many sectors of industry and poses many questions to those seeking information about its features and practical applications.

Here are some of the key queries we regularly encounter.

Click here >>

Use Our Calculators

Norbar has devised easy-to-use online calculators that support the correct application of torque in three key areas:

  1. Unit conversion to assist international measurement definitions.
  2. Torque extension for setting correct values
  3. Torque tension to identify precise levels of torque to be applied for individual applications.
Copyright 2016 Norbar

Norbar Torque Tools. 45-47 Raglan Avenue, Edwardstown, SA 5039, Australia