The Voice of
Torque Control

You are here: Products  >  Torque Measurement  >  Accessories for Transducers

Accessories for Transducers

Accessories for Norbar Torque Transducers including Bench Stands, Joint Simulation Rundown Assemblies, Mounting Brackets and Power Tool Test Fixtures.

Bench Stands

Bench Stands
  • Ensures the correct mounting of Norbar's Static Torque Transducers up to 5000 N·m (5000 lbf·ft).
  • All bench stands (except Extra Large) are machined to accept Norbar Rundown Nose Assemblies (Joint Simulators) for power tool testing and calibration.
  • For transducers in the range 1 N·m to 10 N·m (100 ozf·in to 100 lbf·in), Torque Limiting Bench stands are available. These are designed to prevent transducer over-load.
  • All 'Small Frame Size' Bench Stands can be mounted horizontally or vertically.
Read more

Joint Simulators for FMT

Joint Simulators for FMT

The Norbar Joint Simulation Rundown Assemblies for Flange Mounted Transducers allow joint simulation for power tool testing.  They can be used on Flange Mounted Transducers and also fit the Norbar TST instruments.

Read more

Joint Simulators for STB

Joint Simulators for STB

The Norbar joint simulation rundown assemblies allow for power tool testing. For use with Static Torque Block

Read more

Joint Simulators for Static Transducers

Joint Simulators for Static Transducers

The Norbar Joint Simulation Rundown Assemblies are designed to simulate the working conditionsof screwed or bolted joints. Used in conjunction with a Norbar transducer, bench stand and display instrument, the output of torque controlled power tools can be measured against a range of simulated joint rates, from hard through to soft.

Suitable for a wide variety of power tools including pneumatic/electric screwdriver and angle wrenches with either clutch or stall torque control.

Read more

Power Tool Test Fixture

Power Tool Test Fixture

The Norbar Test Fixtures are designed to simulate the working conditions of screwed or bolted joints. Used in conjunction with a Norbar transducer, bench stand and display instrument, the output of torque controlled power tools can be measured against a range of simulated joint rates, from hard through to soft.

  • Suitable for a wide variety of power tools including pneumatic/electric screwdriver and angle wrenches with either clutch or stall torque control.

  • Models available for torques from 0.2 N·m to 6780 N·m (2 lbf·in to 5000 lbf·ft).

  • Spring washers and full instructions are provided to simulate a wide range of joint types as detailed in: BS6268:1982, BS6544:1981, ISO5393:1981.

Read more

Power Tool Test Fixture for TruCheck

Power Tool Test Fixture for TruCheck

These power tool test fixtures incorporate a joint simulation rundown assembly, base plate, reaction plate, drive adaptors and a reaction adaptor. When used in conjunction with a TruCheck Plus 1000 or 2000 they provide a cost effective means of testing Norbar;s PTM-52, PTM-72 and PT72 tools.

Read more

Test Fixture Accessories

Test Fixture Accessories

Accessories for the Norbar power tool test fixture.

Read more

Transducer Leads

Transducer Leads

If ordering a Static, Annular or Rotary transducer you will also require a corresponding lead. To comply with the latest calibration standards, most new transducer leads will have a suffix to indicate the length in centimetres.

Read more

Transducer Sleeve Adaptors

Transducer Sleeve Adaptors

Sleeve adaptors for Norbar torque transducers, female to male.

Read more

Inserts for Bench Stands

Inserts for Bench Stands

1/4", 3/8", 1/2", 3/4" and 1" square drive inserts for use with Norbar bench stands.

Read more

FMT Mounting Brackets

FMT Mounting Brackets

Mounting brackets for use with Norbar Flange Mounted Transducers

Read more

FMT Adaptors

FMT Adaptors

Adaptors for use with Norbar Flange Mounted Transducers.

Read more

Washer Stacks for Joint Simulation Rundown Assemblies

Washer Stacks for Joint Simulation Rundown Assemblies

Washer stacks for use with Norbar Joint Simulation Rundown Assemblies, to simulate hard through to soft joints.

Read more

Product Selector

Finding the correct torque tool for your specific application is essential to ensure torque is applied accurately and with maximum ease.

Use our Product Selector to find exactly the right Norbar tool for the job.

Click here >>

Find a Distributor

There are Norbar companies in the UK, North America, Australia, New Zealand, Singapore, China and India, together with a network of specialist distributors in most countries.

Select any region on our world map for contact details.

Click here >>

Download Catalogue

Details of Norbar’s extensive range of torque wrenches, multipliers and equipment for measurement and calibration can be downloaded in our comprehensive online product catalogue.

Click here >>

Norbar Videos

Norbar’s collection of training videos.

Click here >>

Norbar News & Updates

Read about Norbar’s news and developments in the UK and across our international network for the latest updates on the fascinating and fast-moving world of precision torque engineering.

Click here >>

Download Our Apps

Norbar apps are available free for download on Android and iPhone and are invaluable tools for engineers.

Our Torque Unit Converter provides instant conversion across Metric, SI and Imperial units.

The Torque Extension app calculates the exact torque wrench setting value for required level of torque to be applied.

Click here >>

FAQ

Precision torque engineering is a wide and complex field which is critical to many sectors of industry and poses many questions to those seeking information about its features and practical applications.

Here are some of the key queries we regularly encounter.

Click here >>

Use Our Calculators

Norbar has devised easy-to-use online calculators that support the correct application of torque in three key areas:

  1. Unit conversion to assist international measurement definitions.
  2. Torque extension for setting correct values
  3. Torque tension to identify precise levels of torque to be applied for individual applications.
Copyright 2016 Norbar

Norbar Torque Tools. 45-47 Raglan Avenue, Edwardstown, SA 5039, Australia