The Norbar Joint Simulation Rundown Fixtures are designed to simulate the working conditions of screwed or bolted joints. Used in conjunction with a Norbar transducer, bench stand and display instrument, the output of torque controlled power tools can be measured against a range of simulated joint rates, from hard through to soft.
- Suitable for a wide variety of power tools including pneumatic/electric screwdriver and angle wrenches with either clutch or stall torque control.
- Models available for torques from 0.2 N·m to 6780 N·m (2 lbf·in to 5000 lbf·ft).
- Spring washers and full instructions are provided to simulate a wide range of joint types as detailed in: BS6268:1982, BS6544:1981, ISO5393:1981.
Rundown Nose Assembly for STB1000, 140 N·m
Part No. 50693
The Norbar Rundown Nose Assemblies are designed to simulate the working conditions of screwed or bolted joints. The output of torque controlled power tools can be measured against a range of simulated joint rates, from hard through to soft.
Rundown Nose Assembly for STB1000, 700 N·m
Part No. 50694
The Norbar Rundown Nose Assemblies are designed to simulate the working conditions of screwed or bolted joints. The output of torque controlled power tools can be measured against a range of simulated joint rates, from hard through to soft.
Joint Simulation Rundown Assemblies for Static Transducers, 2 N·m
Part No. 50313
The Norbar Rundown Nose Assemblies are designed to simulate the working conditions of screwed or bolted joints. Used in conjunction with a Norbar transducer and display instrument, the output of torque controlled power tools can be measured against a range of simulated joint rates, from hard through to soft. Note: If you do not already have a bench stand, you will require a Rundown Fixture instead of a Rundown Nose Assembly.
Joint Simulation Rundown Assemblies for Static Transducers, 10 N·m
Part No. 50251
The Norbar Rundown Nose Assemblies are designed to simulate the working conditions of screwed or bolted joints. Used in conjunction with a Norbar transducer and display instrument, the output of torque controlled power tools can be measured against a range of simulated joint rates, from hard through to soft. Note: If you do not already have a bench stand, you will require a Rundown Fixture instead of a Rundown Nose Assembly.
Joint Simulation Rundown Assemblies for Static Transducers, 50 N·m
Part No. 50252
The Norbar Rundown Nose Assemblies are designed to simulate the working conditions of screwed or bolted joints. Used in conjunction with a Norbar transducer and display instrument, the output of torque controlled power tools can be measured against a range of simulated joint rates, from hard through to soft. Note: If you do not already have a bench stand, you will require a Rundown Fixture instead of a Rundown Nose Assembly.
Joint Simulation Rundown Assemblies for Static Transducers, 100 N·m
Part No. 50253
The Norbar Rundown Nose Assemblies are designed to simulate the working conditions of screwed or bolted joints. Used in conjunction with a Norbar transducer and display instrument, the output of torque controlled power tools can be measured against a range of simulated joint rates, from hard through to soft. Note: If you do not already have a bench stand, you will require a Rundown Fixture instead of a Rundown Nose Assembly.
Joint Simulation Rundown Assemblies for Static Transducers, 500 N·m
Part No. 50254
The Norbar Rundown Nose Assemblies are designed to simulate the working conditions of screwed or bolted joints. Used in conjunction with a Norbar transducer and display instrument, the output of torque controlled power tools can be measured against a range of simulated joint rates, from hard through to soft. Note: If you do not already have a bench stand, you will require a Rundown Fixture instead of a Rundown Nose Assembly.