|
|
 |
 |
 The PT52 is engineered to be one of the lightest and fastest tools of its type on the market. The exceptionally compact 52mm diameter gearbox means that the tool is well balanced, light weight and provides excellent access to bolts. Three versions are available, Stall, Shut-Off Internal and Shut-Off External. - Fast - 1000 N.m version has a free speed of 125 rpm for rapid bolt run-down.
- Light weight - single direction stall tool weighs just 3.8 kg.
- Quiet - less than 85 dB(A) when under load.
- Non impacting - low vibration levels make these tools comfortable and safe to use.
- Square drive is quickly and easily replaced.
- 'Soft Start' trigger control aids socket location and allows gradual and safe reaction location.
- For safety, gearbox can rotate independently from the handle so that reaction forces are not transmitted back to the operator.
- 1" square drive available, Part Code 18545.
(Obsolete) Pneumatic Multiplier, 1000 N.m, Bi-Directional, Stall with integral regulator, 3/4" square drive;Pneutorque PT52 (obsolete)
Part No. 18042B06
The PT52 is engineered to be one of the lightest and fastest tools of its type on the market. The exceptionally compact 52mm diameter gearbox means that the tool is well balanced, light weight and provides excellent access to bolts. "Internal Regulator" versions are fitted with a regulator in the air inlet tube. Customers with suitable calibration equipment can set the torque output by adjusting the air regulator. The tool can then be run direct from the air supply without a 'Lubro Control Unit'. These tools are supplied with an air pressure graph which will apply only when the regulator is in the fully open position.
(Obsolete) Pneumatic Multiplier, 1000 N.m, Forward only, Stall with integral regulator, 3/4" square drive;Pneutorque PT52 (obsolete)
Part No. 18042F06
The PT52 is engineered to be one of the lightest and fastest tools of its type on the market. The exceptionally compact 52mm diameter gearbox means that the tool is well balanced, light weight and provides excellent access to bolts. "Internal Regulator" versions are fitted with a regulator in the air inlet tube. Customers with suitable calibration equipment can set the torque output by adjusting the air regulator. The tool can then be run direct from the air supply without a 'Lubro Control Unit'. These tools are supplied with an air pressure graph which will apply only when the regulator is in the fully open position.
(Obsolete) Pneumatic Multiplier, 600 N.m, Bi-Directional, Stall with integral regulator, 3/4" square drive;Pneutorque PT52 (obsolete)
Part No. 18041B06
The PT52 is engineered to be one of the lightest and fastest tools of its type on the market. The exceptionally compact 52mm diameter gearbox means that the tool is well balanced, light weight and provides excellent access to bolts. "Internal Regulator" versions are fitted with a regulator in the air inlet tube. Customers with suitable calibration equipment can set the torque output by adjusting the air regulator. The tool can then be run direct from the air supply without a 'Lubro Control Unit'. These tools are supplied with an air pressure graph which will apply only when the regulator is in the fully open position.
(Obsolete) Pneumatic Multiplier, 600 N.m, Bi-Directional, Stall with integral regulator, 3/4" square drive;Pneutorque PT52 (obsolete)
Part No. 18041.B06
The PT52 is engineered to be one of the lightest and fastest tools of its type on the market. The exceptionally compact 52mm diameter gearbox means that the tool is well balanced, light weight and provides excellent access to bolts. "Internal Regulator" versions are fitted with a regulator in the air inlet tube. Customers with suitable calibration equipment can set the torque output by adjusting the air regulator. The tool can then be run direct from the air supply without a 'Lubro Control Unit'. These tools are supplied with an air pressure graph which will apply only when the regulator is in the fully open position.
(Obsolete) Pneumatic Multiplier, 600 N.m, Forward only, Stall with integral regulator, 3/4" square drive;Pneutorque PT52 (obsolete)
Part No. 18041F06
The PT52 is engineered to be one of the lightest and fastest tools of its type on the market. The exceptionally compact 52mm diameter gearbox means that the tool is well balanced, light weight and provides excellent access to bolts. "Internal Regulator" versions are fitted with a regulator in the air inlet tube. Customers with suitable calibration equipment can set the torque output by adjusting the air regulator. The tool can then be run direct from the air supply without a 'Lubro Control Unit'. These tools are supplied with an air pressure graph which will apply only when the regulator is in the fully open position.
(Obsolete) Pneumatic Multiplier, 600 N.m, Forward only, Stall with integral regulator, 3/4" square drive;Pneutorque PT52 (obsolete)
Part No. 18041.F06
The PT52 is engineered to be one of the lightest and fastest tools of its type on the market. The exceptionally compact 52mm diameter gearbox means that the tool is well balanced, light weight and provides excellent access to bolts. "Internal Regulator" versions are fitted with a regulator in the air inlet tube. Customers with suitable calibration equipment can set the torque output by adjusting the air regulator. The tool can then be run direct from the air supply without a 'Lubro Control Unit'. These tools are supplied with an air pressure graph which will apply only when the regulator is in the fully open position.
(Obsolete) Pneumatic Multiplier, 1000 N.m, Bi-Directional, Stall with integral regulator, 3/4" square drive;Pneutorque PT52 (obsolete)
Part No. 18042.B06
The PT52 is engineered to be one of the lightest and fastest tools of its type on the market. The exceptionally compact 52mm diameter gearbox means that the tool is well balanced, light weight and provides excellent access to bolts. "Internal Regulator" versions are fitted with a regulator in the air inlet tube. Customers with suitable calibration equipment can set the torque output by adjusting the air regulator. The tool can then be run direct from the air supply without a 'Lubro Control Unit'. These tools are supplied with an air pressure graph which will apply only when the regulator is in the fully open position.
(Obsolete) Pneumatic Multiplier, 1000 N.m, Forward only, Stall with integral regulator, 3/4" square drive;Pneutorque PT52 (obsolete)
Part No. 18042.F06
The PT52 is engineered to be one of the lightest and fastest tools of its type on the market. The exceptionally compact 52mm diameter gearbox means that the tool is well balanced, light weight and provides excellent access to bolts. "Internal Regulator" versions are fitted with a regulator in the air inlet tube. Customers with suitable calibration equipment can set the torque output by adjusting the air regulator. The tool can then be run direct from the air supply without a 'Lubro Control Unit'. These tools are supplied with an air pressure graph which will apply only when the regulator is in the fully open position.
(Obsolete) Pneumatic Multiplier, 600 N.m, Bi-Directional, Stall with torque monitor, 3/4" square drive;Pneutorque PT52 (obsolete)
Part No. 18043B06
The PT52 is engineered to be one of the lightest and fastest tools of its type on the market. The exceptionally compact 52mm diameter gearbox means that the tool is well balanced, light weight and provides excellent access to bolts. The integration of electronic torque measurement and control is achieved with the minimum impact on the overall tool size and weight. Torque Monitor - these stall tools are fitted with a torque transducer, torque display and limit detection. As the tool is operated, the applied torque is displayed on the tool handle. It is possible to set low and high limits so that when the tool stalls, either an orange, green or red light is illuminated on the display panel.
(Obsolete) Pneumatic Multiplier, 600 N.m, Forward only, Stall with torque monitor, 3/4" square drive;Pneutorque PT52 (obsolete)
Part No. 18043F06
The PT52 is engineered to be one of the lightest and fastest tools of its type on the market. The exceptionally compact 52mm diameter gearbox means that the tool is well balanced, light weight and provides excellent access to bolts. The integration of electronic torque measurement and control is achieved with the minimum impact on overall tool size and weight. Torque Monitor - these stall tools are fitted with a torque transducer, torque display and limit detection. As the tool is operated, the applied torque is displayed on the tool handle. It is possible to set low and high limits so that when the tool stalls, either an orange, green or red light is illuminated on the display panel.
(Obsolete) Pneumatic Multiplier, 1000 N.m, Bi-Directional, Stall with torque monitor, 3/4" square drive;Pneutorque PT52 (obsolete)
Part No. 18044B06
The PT52 is engineered to be one of the lightest and fastest tools of its type on the market. The exceptionally compact 52mm diameter gearbox means that the tool is well balanced, light weight and provides excellent access to bolts. The integration of electronic torque measurement and control is achieved with the minimum impact on overall tool size and weight. Torque Monitor - these stall tools are fitted with a torque transducer, torque display and limit detection. As the tool is operated, the applied torque is displayed on the tool handle. It is possible to set low and high limits so that when the tool stalls, either an orange, green or red light is illuminated on the display panel.
(Obsolete) Pneumatic Multiplier, 1000 N.m, Forward only, Stall with torque monitor, 3/4" square drive;Pneutorque PT52 (obsolete)
Part No. 18044F06
The PT52 is engineered to be one of the lightest and fastest tools of its type on the market. The exceptionally compact 52mm diameter gearbox means that the tool is well balanced, light weight and provides excellent access to bolts. The integration of electronic torque measurement and control is achieved with the minimum impact on overall tool size and weight. Torque Monitor - these stall tools are fitted with a torque transducer, torque display and limit detection. As the tool is operated, the applied torque is displayed on the tool handle. It is possible to set low and high limits so that when the tool stalls, either an orange, green or red light is illuminated on the display panel.
(Obsolete) Pneumatic Multiplier, 600 N.m, Bi-Directional, Shut-off, 3/4" square drive;Pneutorque PT52 (obsolete)
Part No. 18045B06
The PT52 is engineered to be one of the lightest and fastest tools of its type on the market. The exceptionally compact 52mm diameter gearbox means that the tool is well balanced, light weight and provides excellent access to bolts. The integration of electronic torque measurement and control is achieved with the minimum impact on overall size and weight. Shut-Off tools are similar to the Torque Monitor tools but with the addition of an in-built solenoid valve to shut off the air supply to the motors once the low limit has been achieved. Because the tool is not relying on a set air pressure to achieve stall at a specific torque, air pressure can generally be kept higher than with stall tools and this results in greater speed. This is the ultimate PT52 and will appeal to production line customers seeking a self contained shut-off solution with no need for complicated and expensive external controllers.
(Obsolete) Pneumatic Multiplier, 600 N.m, Forward only, Shut-off, 3/4" square drive;Pneutorque PT52 (obsolete)
Part No. 18045F06
The PT52 is engineered to be one of the lightest and fastest tools of its type on the market. The exceptionally compact 52mm diameter gearbox means that the tool is well balanced, light weight and provides excellent access to bolts. The integration of electronic torque measurement and control is achieved with the minimum impact on overall size and weight. Shut-Off tools are similar to the Torque Monitor tools but with the addition of an in-built solenoid valve to shut off the air supply to the motors once the low limit has been achieved. Because the tool is not relying on a set air pressure to achieve stall at a specific torque, air pressure can generally be kept higher than with stall tools and this results in greater speed. This is the ultimate PT52 and will appeal to production line customers seeking a self contained shut-off solution with no need for complicated and expensive external controllers.
(Obsolete) Pneumatic Multiplier, 1000 N.m, Bi-Directional, Shut-off, 3/4" square drive;Pneutorque PT52 (obsolete)
Part No. 18046B06
The PT52 is engineered to be one of the lightest and fastest tools of its type on the market. The exceptionally compact 52mm diameter gearbox means that the tool is well balanced, light weight and provides excellent access to bolts. The integration of electronic torque measurement and control is achieved with the minimum impact on overall tool size and weight. Shut-Off tools are similar to the Torque Monitor tools but with the addition of an in-built solenoid valve to shut off the air supply to the motors once the low limit has been achieved. Because the tool is not relying on a set air pressure to achieve stall at a specific torque, air pressure can generally be kept higher than with stall tools and this results in greater speed. This is the ultimate PT52 and will appeal to production line customers seeking a self contained shut-off solution with no need for complicated and expensive external controllers.
(Obsolete) Pneumatic Multiplier, 1000 N.m, Forward only, Shut-off, 3/4" square drive;Pneutorque PT52 (obsolete)
Part No. 18046F06
The PT52 is engineered to be one of the lightest and fastest tools of its type on the market. The exceptionally compact 52mm diameter gearbox means that the tool is well balanced, light weight and provides excellent access to bolts. The integration of electronic torque measurement and control is achieved with the minimum impact on overall tool size and weight. Shut-Off tools are similar to the Torque Monitor tools but with the addition of an in-built solenoid valve to shut off the air supply to the motors once the low limit has been achieved. Because the tool is not relying on a set air pressure to achieve stall at a specific torque, air pressure can generally be kept higher than with stall tools and this results in greater speed. This is the ultimate PT52 and will appeal to production line customers seeking a self contained shut-off solution with no need for complicated and expensive external controllers.
 Engineer to Order
Product Catalogues & Handbooks Typical Applications |
 |
|
|
|
|
|
|
|