The ISO 1000 and ISO 2000 Torque Loaders allow torque wrenches to be calibrated or tested in accordance with ISO6789:1992, BS EN 26789:1994 and American military standard GGG-W-686. Their function is to take full advantage of the accuracy of the ETS torque measuring system by reducing operator induced variations in the calibration process.

• The high ratio, 1200:1 (ISO 2000, 1250:1) gearbox allows high torques to be applied, whilst ensuring that the operator does not exceed the rate of increase of torque specified in the standards.
• The design allows for easy interchange of transducers using the Norbar Static Transducer system.
• The ISO 1000 90 degree facility allow the performance of torque wrenches to be checked in two planes. Many wrenches give different torque values according to their orientation in use.
• Floating reaction point minimises side loads on wrench.
• ISO 2000 reaction extension bar allows wrenches uo to 2250mm to be tested. This can be removed to save space. Wrenches up to 1045mm can be tested when the extension bar is not fitted.
• Optional Small Reaction Plate allows torque wrenches down to 100mm in length (centre of square to centre of handle) to be tested.
• Motorised version with speed control is available for the ISO 1000. This can be purchased as a kit to motorise an existing ISO or as a complete ISO 1000 Motorised Torque Wrench Tester.

These loaders allow torque wrenches to be calibrated or tested in accordance with ISO 6789:1992, BS EN 26789:1994 and American military standard GGG-W-686. Their function is to take full advantage of the accuracy of the ETS torque measuring system by reducing operator induced variations in the calibration process.

These loaders allow torque wrenches to be calibrated or tested in accordance with ISO 6789:1992, BS EN 26789:1994 and American military standard GGG-W-686. Their function is to take full advantage of the accuracy of the ETS torque measuring system by reducing operator induced variations in the calibration process.

These loaders allow torque wrenches to be calibrated or tested in accordance with ISO 6789:1992, BS EN 26789:1994 and American military standard GGG-W-686. Their function is to take full advantage of the accuracy of the ETS torque measuring system by reducing operator induced variations in the calibration process.

This kit is for use with the ISO 1000 Torque Wrench Loader, to allow for speed control.