Many ancillaries are available for Norbar's instrumentation products.
For example, when ordering 'Static' or 'Annular' transducers a corresponding lead is also required.
Serial Data Lead Kit
Part No. 60248
This kit enables Norbar Pro-Test, TST and TTT instruments to connect to most PCs and RS232 printers.
Kit contains 1 each of the following:
- 9 way 'D' socket to 9 Way 'D' socket, null modem.
- 25 way 'D' plug to 9 way 'D' socket.
- 25 pin gender changer, socket to socket.
- 9 pin gender changer, plug to plug.
(Obsolete) 10 Channel Selection Unit
Part No. 60165
The Ten Channel Selection Unit is used in conjunction with a modified ETS LD or DTS LTD, to expand the number of limits (upper and lower) from one up to a maximum of ten.
(Obsolete) 5 Way Switch Unit
Part No. 60163
Where a number of transducers are in constant use, it can be inconvenient to keep changing transducer leads and amplifiers. The 5 Way Switch Unit overcomes this problem.
(Obsolete) Battery Power Unit
Part No. 60166
The Battery Power Unit is a ruggedly built re-chargeable unit that allows complete portability of the ETS or DTS system. The unit can power up to two display instruments or one display and one Norbar Data Printer. TWA display units for use with Battery Power Unit are available to special order.
(Obsolete) Data Printer
Part No. 60164
The Norbar Data Printer is a serial (RS-232-C), dot matrix, impact ribbon printer that conforms to current EC Directives and safety standards.
(Obsolete) Print Inhibit Controller
Part No. 60167
The Print Inhibit Controller is a remote, hand held device for controlling the RS-232-C output from all of Norbar's CE marked display instruments.
The Controller allows 3 possible modes of operation:
1. RS-232-C data output as normal, so giving data on each request.
2. Completely disabled RS-232-C data output.
3. RS-232-C output on the next request, all subsequent requests inhibited.