Torque Tools, Torque Measuring Equipment

'SMART' Static Transducer, 250 lbf.ft, 3/4" square drive; for TST, TTT or Pro-Log

100 N.m Static Transducer

The accuracy and quality of the Norbar Static Torque Transducers has made them the first choice of many calibration laboratories throughout the world.

Product's part number:	50702.LOG
Product's NATO number:
Product's Accuracy:	See Text
Operates between:	25 - 250 lbf.ft

Technical Specification

Weight: 1.5 Kg
Temp Range Operating: -10°C to +50°C
Temp Range Storage: -20°C to +70°C
Thermal Effect On Span: < +/- 0.03%/°C
Thermal Effect On Zero: < +/- 0.01%/°C
Torsional Deflection: < 1°
Fatigue: > 10 exp 7 cycles
Maximum Torsion Capacity: 150%
Drive 1: 3/4" Male Square
Drive 2: 3.4" Female Square
Reaction Plate Weight: 6 Way Mil Spec

Features

Up to 5000 N.m (5000 lbf.ft) classified to BS7882:2008, typically better than Class 1 for the primary classification range (+/-0.5% of reading).
Robust, heat treated, alloy steel torsion shaft design.
Designed to ignore non torsional forces.
Operates in clockwise and anti-clockwise directions.
Calibrated in clockwise direction as standard. Anti-clockwise calibration provided on request.
'SMART' transducers have a built in memory circuit which contains essential information about the transducer. This information can be read by Norbar's 'Pro-Log' instrument meaning that when the transducer is connected, it is immediately recognised and ready for use. When ordering for a Pro-Log, use part code suffix '.LOG' (eg. 50659.LOG) if you require a torque units calibration certificate.
'SMART' transducers can also be used with many instruments not of Norbar manufacture. However, these will operate as normal ratio calibrated (mV/V) transducers - the 'SMART' data will not be read. For non Norbar instruments or for when a mV/V certificate is required, use part code suffix '.IND'.
Calibration up to 5000 N.m (lbf.ft) with UKAS Certificate, above 5000 N.m (lbf.ft) with a traceable calibration certificate.

Downloads:

AutoCAD Outline Drawing

Metafile Outline Drawing

Operators Handbook

Catalogue:

Pg76-77.pdf