'P' Type Torque Wrenches are designed for the production environment where they will be set and then dedicated to a particular application. There is no scale, the wrench must be set against a torque testing device such as Norbar's Professional Torque Tester. The push-through ratchets on these models are robustly engineered for strength and durability. The strength and high wear resistance comes from a coarse tooth pattern while a principle of offset ratchet pawls gives a narrow engagement angle. The push-through square drive is not only a robust design but allows the wrench to be used for torque control in both the clockwise and anti clockwise directions, and allows for a wider model range of up to 400 N·m.
Technical SpecificationLength: 299 mmSquare Size: 1/2"Weight: 0.69 KgRatchet Teeth: 72Ratchet Type: Industrial Push-ThroughRatchet Diameter: 40 mmFeaturesSetting system is designed to discourage unauthorised alteration.Coloured end seals are provided to identify the wrench to a particular operator, torque setting or calibration period.Accuracy of +/-3% of reading exceeds all international standards for torque wrenches.Every wrench is supplied with a calibration certificate to satisfy the requirements of ISO 9000.Available with a high quality ratchet or as a 'Torque Handle'.Retained square drive will not pull out of the head when the socket is removed.Supplied in a moulded box for storage and protection.
Engineer to Order
Product Catalogues & Handbooks
Have a question?
Read the Norbar FAQ
Norbar products are manufactured in the factory in Banbury, England. The factory's ISO 9001 certification is key to providing good customer service worldwide.