(Obsolete) Electronic display with limit detector; Electronic Transducer System ETS LD for Rate Controlled Torque Wrench Tester

ETS fitted with Limit Detector

The ETS display, when used in conjunction with one of Norbar's wide range of precision transducers, provides one of the most accurate measuring systems available. Norbar are the only manufacturer able to offer accredited certification of the torque display instrument. This ensures that each element of the system complies with the requirements of BS7882:1997. The ETS is not dedicated to a particular transducer but can be used with as many as are appropriate with a quick and straight forward method of set up and change. Because of the accredited certification, any certified instrument can be used with any certified transducers without effecting the validity of the transducer's calibration. The High and Low limits of the Limit Detector version can be utilised to provide the logic to control external circuitry such as switching machinery or controlling external pass/reject indicators.

Product's part number:  40324 Product's NATO number:  6635-99-075-6357 Product's Accuracy:  +/- 0.1% Operates between:

Technical Specification Resolution 5s Range: 1 in 50,000 Limit Detector: Yes Battery Pack: No Use With 10 Chan Unit: No Use With RCTWT: Yes Temp Range: -10°C to +50°C Weight: 3.15 Kg Resolution 1s Range: 1 in 10,000 Features Resolution 2.5s Range: 1 in 25,000 RS-232-C is provided as standard for the output of data to a printer, PC, data capture unit, SPC software. Full 5 digit resolution. Switchable 500Hz signal filter allows calibration of power tools in accordance with the power tool testing standard, ISO 5393:1994. Range of 0 - 150% of transducer full scale. Three operating modes: 'Track' displays the live value, 'Memory' records the highest value and 'Memory Auto Reset' captures the first peak of torque (for click type wrenches). All common units of torque are included as well as units of force, pressure, angle and length. Unwanted units can be internally switched out. Accuracy is expressed as an expanded uncertainty; +/-0.1%. Upper and lower limits allow a 'pass' band to be set for foolproof inspection checking. 'Low' (L), 'Pass' (P), and 'High' (H) flag can be downloaded to a printer to highlight out of tolerance test results. Versatile relay settings allow the ETS to be matched to a wide variety of control applications. For use with Rate Controlled ISO.

---

Downloads:

AutoCAD Outline Drawing

Metafile Outline Drawing

Operators Handbook