Norbar
  Small textMedium textLarge text
Connect with us on Linkedin View our photos on Flickr Visit our Youtube channel Find us on Facebook Visit our blog Follow us on Twitter Linkedin Flickr YouTube Facebook Blog Twitter Linkedin Flickr YouTube Facebook Blog Twitter Linkedin Flickr YouTube Facebook Blog Twitter


Site Search

 Search

Product Search

 
  

Switch to Mobile Site

The Norbar mobile website is designed to be best viewed on a mobile device
Norbar MobileView our mobile website
Switch here
 

Your local Norbar web site


Local Norbar Distributor

Minimize
  

Calculators

  

Latest News from Norbar

  

Translate This Page

Minimize
  

 Norbar » Products

Catalogues & Handbooks

Minimize
  

DTS LD (obsolete)

(Obsolete) Electronic display with limit detector; Dedicated Transducer System DTS LD

Electronic display with limit detector;
Dedicated Transducer System DTS LD
DTS Display Unit

Many applications require only one transducer, but those offered with the TWA may not be suitable. In these instances, the Dedicated Transducer System is the ideal solution. Select the appropriate DTS display, any Norbar Transducer and, where appropriate, a bench stand. Supplied with Limit Detector, the high and low limits can be utilised to provide the logic to control external circuitry.

Part number: 43160
EAN Bar Code: 
NATO number: 
Accuracy: +/- 0.1%
Operates between:

    Technical Specification
  • Resolution 5s Range: 1 in 50,000
  • Limit Detector: Yes
  • Temperature Range: -10°C to +50°C
  • BatteryPack: No
  • For Use With 10 Chan Unit: No
  • For Use With RCTWT: No
  • Weight: 3.15 Kg
  • Resolution 1s Range: 1 in 10,000
    Features
  • Resolution 2.5s Range: 1 in 25,000
  • RS-232-C is provided as standard for the output of data to a printer, PC, data capture unit, SPC software.
  • Full 5 digit resolution.
  • Three operating modes: 'Track' displays the live value, 'Memory' records the hightest value and 'Memory Auto Reset' captures the first peak of torque (for click type wrenches).
  • All common units of torque are included as well as units of force, pressure, angle and length. Unwanted units can be internally switched out.
  • Switchable 500Hz signal filter allows calibration of power tools in accordance with the power tool testing standard, ISO 5393:1994.
  • Can be used with Rundown Fixtures for joint simulation.
  • Accuracy up to 5000 N·m (5000 lbf·ft) classified to BS7882:2008, typically better than Class 1 for the primary classification range (+/-0.5% of reading).
  • Range of 0 - 150% of transducer full scale (unless otherwise specified).

Downloads:Operators Handbook

  Engineer to Order

  Product Catalogues & Handbooks 

  Typical Applications

 Print   

'Voice of Torque'

Ask the Voice of Torque

Have a question?
Read the Norbar FAQ

  

Standards

Norbar products are manufactured in the factory in Banbury, England. The factory's ISO 9001 certification is key to providing good customer service worldwide.

  

Subscribe To Norbar

  

 Copyright © Norbar Torque Tools Ltd. All Rights Reserved.
 Distributors Login    Terms Of Use    Privacy Statement     Site Map 
NORBAR TORQUE TOOLS LTD    Beaumont Road, Banbury, Oxfordshire, OX16 1XJ, United Kingdom
Tel + 44 (0) 1295 753600  Enquiries + 44 (0) 1295 270333  Fax + 44 (0) 1295 753643  Email enquiry@norbar.com
Registered Office as above - Registered in England No. 380480 - VAT No. GB 119 1060 05
LinkedinFlickrYouTubeFacebookBlogTwitter