Impulse Rotary transducers differ from the Standard Rotary in that it has been specifically designed to withstand and accurately measure the torque and angle output from impulse power tools and certain non-impulse tools with a severe clutch action. Not for use with Impact tools. This transducer is designed to work with our Dedicated Transducer System (DTS).
Technical SpecificationWeight: 0.26 KgTemp Range Operating: -10°C to +50°CTemp Range Storage: -20°C to +70°CThermal Effect On Span: < +/- 0.03%/°CThermal Effect On Zero: < +/- 0.01%/°CTorsional Deflection: < 1°Fatigue: > 10 exp 7 cyclesMaximum Torsion Capacity: 150%Drive 1: 1/4" MaleDrive 2: 1/4" FemaleInternal Angle Encoder: IncrementalAngle Power Requirements: +5VDC, 30mA maxAngle Output: 2 Channel QuadratureAngle Resolution: 360 pulses per revolution (PPR)FeaturesClassified to BS7882:2008, typically better than Class 1 for the primary classification range (+/-0.5% of reading).Wide calibration range means that the minimum number of transducers are required.
Engineer to Order
Product Catalogues & Handbooks
Have a question?
Read the Norbar FAQ
Norbar products are manufactured in the factory in Banbury, England. The factory's ISO 9001 certification is key to providing good customer service worldwide.